Why is my handheld vacuum cleaner not working

When your handhled vacuum cleaner stops working

A handheld vacuum cleaner that cannot be turned on or left open is a common problem - but it is usually easy to fix with expert advice. These problem-solving tips should help you reboot your device and get it running again.

1.The first thing – check the power

It sounds simple, but the lack of power is often the cause of the vacuum cleaner's inability to work. Check that the vacuum cleaner is plugged into a working electrical outlet and that the fuses and circuit breakers do not need to be reset.

2.Activated thermal fuse

The next most likely cause is a thermal fuse that is activated by a blockage. Check hoses and filters for blockages and remove any obstructions found.

3.Full of bags

In some cases, filling the vacuum bag will prevent the device from turning on. To solve this problem, just replace the bag.

4.Vacuum cleaner line is damaged

If all other methods fail, it may be the cause of damage to the vacuum cleaner. First, check that the power cord is properly connected to the vacuum cleaner (again, this is easy to ignore) and there is no crack in the rubber. If the power cord is damaged, it needs to be repaired or replaced immediately.

5.On/off switch failure

The on/off switch may be interrupted over time and needs to be replaced. Although different vacuum cleaners have different switches, their replacement is very similar.

6.engine

If the motor fails, the vacuum cleaner seems to have failed. Keep in mind that motor faults are usually caused by other problems, such as filter blockage or excessive use of the same vacuum bag. Therefore, when replacing the motor, remember to check if there is no fundamental problem that causes the motor to malfunction.

7.Vacuum cleaner smell

Does your vacuum cleaner have an odor? There are a number of common causes for this problem that can often be easily resolved. These troubleshooting tips should help you identify and resolve problems.

8.Dirty filter

Dirty filters are another possible culprit. Try cleaning the filter with a mixture of baking soda and water – if this does not work, you will need to replace the filter.

9.Vacuum cleaner does not suck

Did you find that your mini vacuum cleaner could not properly remove dust? This is a common problem, but it is usually easy to fix. The following tips can help you solve the problem.